Snmp-Server User - Dell PowerConnect 3424 Cli Reference Manual

Default Configuration
No group entry exists.
Command Mode
Global Configuration mode
User Guidelines
The index of the group name table is comprised of Group Name, Security Model, and
Security Level. Different views for the same group can be defined with different security
levels. For example, after having created the appropriate views, a group can be created for
which "no authentication" is required, while allowing only notification view for "interfaces".
A group of the same name can be created for which "priv" authentication is required. Read
views can, for example, be configured for this group for mib2, and write views for interfaces.
In this case, users in this group who send "priv" packets can modify all "interfaces" MIBs and
view all mib2.
Examples
The following example attaches a group called user-group to SNMPv3 and assigns to the group
the privacy security level and read access rights to a view called user-view.
Console(config)# snmp-server group user-group v3 priv read
user-view

snmp-server user

The snmp-server user Global Configuration mode command configures a new SNMP Version 3
user. To remove a user, use the no form of this command.
Syntax
snmp-server user username groupname [remote engineid-string] [ auth-md5 password | auth-
sha password | auth-md5-key md5-des-keys | auth-sha-key sha-des-keys ]
no snmp-server user username [remote engineid-string]
• username—Specifies the name of the user on the host that connects to the agent. (Range:
1-30 characters)
• groupname—Specifies the name of the group to which the user belongs. (Range: 1-30
characters)
• engineid-string—Specifies the engine ID of the remote SNMP entity to which the user
belongs. The engine ID is a concatenated hexadecimal string. Each byte in the
hexadecimal character string is two hexadecimal digits. Each byte can be separated by a
period or colon. (Range: 5-32 characters)
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
285
SNMP Commands