Syntax
clock source {sntp}
no clock source
•
sntp — SNTP servers
Default Configuration
No external clock source
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example configures an external time source for the system clock.
Console(config)# clock source sntp
clock timezone
The clock timezone Global Configuration mode command sets the time zone for display
purposes. To set the time to the Coordinated Universal Time (UTC), use the no form of this
command.
Syntax
clock timezone hours-offset [minutes minutes-offset] [zone acronym]
no clock timezone
•
hours-offset — Hours difference from UTC. (Range: -12
•
minutes-offset — Minutes difference from UTC. (Range: 0
acronym — The acronym of the time zone. (Range: Up to 4 characters)
•
Default Configuration
Clock set to UTC.
Command Mode
Global Configuration mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
120
Clock
– +
13)
–
59)