Priority-Queue Out Num-Of-Queues - Dell PowerConnect 3424 Cli Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
The following example displays QoS attributes when QoS is disabled on the device.
Console> show qos
Qos: disable
Trust: dscp

priority-queue out num-of-queues

The priority-queue out num-of-queues Global Configuration mode command configures the
number of expedite queues. To return to the default configuration, use the no form of this
command.
Syntax
priority-queue out num-of-queues number-of-queues
no priority-queue out num-of-queues
• number-of-queues — Specifies the number of expedite queues. The expedite queues
would be the queues with higher indexes. (Range: 0 or 4)
Default Configuration
All queues are expedite queues.
Command Mode
Global Configuration mode
User Guidelines
• When the specified number of expedite queues is 0, the Strict Priority scheduling method is
used.
• When the specified number of expedite queues is 4, weights are defined as 1, 2, 4 and 8.
• Port priority queues are used for internal purposes, such as stacking.
Example
The following example configures the number of expedite queues as 0.
Console(config)# priority-queue out num-of-queues 0
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
252
QoS Commands