Snmp-Server Set - Dell PowerConnect 3424 Cli Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Do not include spaces in the text string or place text that includes spaces inside quotation
marks.
Example
The following example defines the device location as New_York.
Console(config)# snmp-server location New_York

snmp-server set

The snmp-server set Global Configuration mode command defines the SNMP MIB value.
Syntax
snmp-server set variable-name name1 value1 [ name2 value2 ...]
• variable-name — MIB variable name.
• name value — List of name and value pairs. In the case of scalar MIBs, only a single pair
of name values. In the case of an entry in a table, at least one pair of name and value
followed by one or more fields.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
• Although the CLI can set any required configuration, there might be a situation where a
SNMP user sets a MIB variable that does not have an equivalent command. In order to
generate configuration files that support those situations, the snmp-server set command is
used.
This
• command is case-sensitive.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
294
SNMP Commands