Dell PowerConnect 3424 Cli Reference Manual page 447

Authentication Method: Remote
Termination Cause: Supplicant logoff
Authenticator State Machine
State: HELD
Backend State Machine
State: IDLE
Authentication success: 9
Authentication fails: 1
The following table describes significant fields shown above:
Field
Port
Admin mode
Oper mode
Reauth Control
Reauth Period
Username
Quiet period
Tx period
Max req
Supplicant timeout
Server timeout
Session Time
MAC address
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
Description
The port number.
The port admin mode. Possible values: Force-auth, Force-unauth, Auto.
The port oper mode. Possible values: Authorized, Unauthorized or Down.
Reauthentication control.
Reauthentication period.
The username representing the identity of the Supplicant. This field shows
the username in case the port control is auto. If the port is Authorized, it
shows the username of the current user. If the port is unauthorized it shows
the last user that was authenticated successfully.
The number of seconds that the device remains in the quiet state following
a failed authentication exchange (for example, the client provided an
invalid password).
The number of seconds that the device waits for a response to an
Extensible Authentication Protocol (EAP)-request/identity frame from the
client before resending the request.
The maximum number of times that the device sends an Extensible
Authentication Protocol (EAP)-request frame (assuming that no response
is received) to the client before restarting the authentication process.
Time in seconds the switch waits for a response to an EAP-request frame
from the client before resending the request.
Time in seconds the switch waits for a response from the authentication
server before resending the request.
The amount of time the user is logged in.
The supplicant MAC address.
447
802.1x Commands