Telnet - Dell PowerConnect 3424 Cli Reference Manual

The following table describes significant fields shown above.
Field
1
i2-gateway.stanford.edu
192.68.191.83
1 msec 1 msec 1 msec
The following table describes characters that may appear in the traceroute command output.
Field Description
* The probe timed out.
? Unknown packet type.
A Administratively unreachable. Usually, this output indicates that an access list is
blocking traffic.
F Fragmentation is required and DF is set.
H Host unreachable.
N Network unreachable.
P Protocol unreachable.
Q Source quench.
R Fragment reassembly time exceeded.
S Source route failed.
U Port unreachable.

telnet

The telnet User EXEC mode command enables logging on to a host that supports Telnet.
Syntax
telnet {ip-address | hostname} [port] [keyword1......]
• ip-address — IP address of the destination host.
• hostname — Host name of the destination host. (Range: 1-158 characters)
• port — A decimal TCP port number, or one of the keywords listed in the Ports table in the
User Guidelines.
• keyword — One or more keywords listed in the Keywords table in the User Guidelines.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
Description
Indicates the sequence number of the device in the path
to the host.
Host name of this device.
IP address of this device.
Round-trip time for each probe sent.
369
System Management