Bridge Multicast Forward-All; Bridge Multicast Forbidden Address - Dell PowerConnect 3424 Cli Reference Manual

Examples
In this example, MAC address 0100.5e02.0203 is forbidden on port 2/e9 within VLAN 8.
Console(config)# interface vlan 8
Console(config-if)# bridge multicast address 0100.5e.02.0203
Console(config-if)# bridge multicast forbidden address
0100.5e02.0203 add ethernet 2/e9

bridge multicast forward-all

The bridge multicast forward-all Interface Configuration (VLAN) mode command enables
forwarding all multicast packets on a port. To restore the default configuration, use the no form
of this command.
Syntax
bridge multicast forward-all {add | remove} {ethernet interface-list | port-channel port-
channel-number-list}
no bridge multicast forward-all
• add — Force forwarding all multicast packets.
• remove — Do not force forwarding all multicast packets.
• interface-list — Separate non-consecutive Ethernet ports with a comma and no spaces; a
hyphen is used to designate a range of ports.
• port-channel-number-list — Separate non-consecutive port-channels with a comma and
no spaces; a hyphen is used to designate a range of port-channels.
Default Configuration
This setting is disabled
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
Address Table Commands
103