Management Acl; Management Access-List - Dell PowerConnect 3424 Cli Reference Manual

Management ACL

management access-list

The management access-list Global Configuration mode command configures a management
access list and enters the Management Access-list Configuration command mode. To delete an
access list, use the no form of this command.
Syntax
management access-list name
no management access-list name
• name — Access list name. (Range: 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
• Use this command to configure a management access list. The command enters the Access-
list Configuration mode, where permit and deny access rules are defined using the permit
(Management) and deny (Management) commands.
• If no match criteria are defined, the default is deny.
• If you re-enter an access list context, the new rules are entered at the end of the access list.
• Use the management access-class command to select the active access list.
• The active management list cannot be updated or removed.
• Management ACL requires a valid management interface, which is a port, VLAN, or port
channel with an IP address or console interface. Management ACL only restricts access to the
device for management configuration or viewing.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
225
Management ACL