Port Security Max; Port Security Routed Secure-Address - Dell PowerConnect 3424 Cli Reference Manual

port security max

The port security max Interface Configuration (Ethernet, port-channel) mode command
configures the maximum number of addresses that can be learned on the port while the port is
in port security mode. To return to the default configuration, use the no form of this command.
Syntax
port security max max-addr
no port security max
• max-addr— Maximum number of addresses that can be learned by the port.
(Range: 1-128)
Default Configuration
The default setting is 1 address.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
This command is only relevant in dynamic learning modes.
Example
In this example, the maximum number of addresses that are learned on port 1/e7 before it is
locked is set to 20.
Console(config)# interface ethernet 1/e7
Console(config-if)# port security mode dynamic
Console(config-if)# port security max 20

port security routed secure-address

The port security routed secure-address Interface Configuration (Ethernet, port-channel) mode
command adds a MAC-layer secure address to a routed port. Use the no form of this command
to delete a MAC address.
Syntax
port security routed secure-address mac-address
no port security routed secure-address mac-address
• mac-address — A valid MAC address.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
108
Address Table Commands