QoS Commands
qos
The qos Global Configuration mode command enables quality of service (QoS) on the
device. To disable QoS on the device, use the no form of this command.
Syntax
qos
no qos
Default Configuration
QoS is disabled on the device.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables QoS on the device.
Console(config)# qos
show qos
The show qos User EXEC mode command displays quality of service (QoS) for the device.
Syntax
show qos
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
251
QoS Commands