Line Commands
line
The line Global Configuration mode command identifies a specific line for configuration and
enters the Line Configuration command mode.
Syntax
line {console | telnet | ssh}
•
console — Console terminal line.
•
telnet — Virtual terminal for remote console access (Telnet).
•
ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example configures the device as a virtual terminal for remote console access.
Console(config)# line telnet
Console(config-line)#
speed
The speed Line Configuration mode command sets the line baud rate. To return to the default
configuration, use the no form of the command.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 9 / 1 3 / 0 6 – F O R P R O O F O N LY
207
Line Commands