Clear Lldp Rx - Dell PowerConnect 3424 Cli Reference Manual

Syntax
lldp management-address ip-address
no management-address ip
ip-address — Specifies the management address to advertise.
•
Default Configuration
No IP address is advertised.
Command Modes
Interface configuration (Ethernet)
User Guidelines
• Each port can advertise one IP address.
• Only static IP addresses can be advertised.
Example
The following example specifies management address that would be advertised from an interface.
Console(config)# interface ethernet g5
Console(config-if)# lldp management-address 192.168.0.1

clear lldp rx

To restart the LLDP RX state machine and clearing the neighbors table, use the clear lldp rx
command in privileged EXEC mode.
Syntax
clear lldp rx [ethernet interface]
• Interface — Ethernet port
Command Modes
Privileged EXEC
User Guidelines
There are no user guidelines for this command.
Example
The folowing example restarts the LLDP RX state machine and clearing the neighbors table.
console (config)#clear lldp rx
220
LLDP Commands