Cisco Unified Communications - Cisco 7911G - IP Phone VoIP Administration Manual

Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-6 Checklist for Configuring the Cisco Unified IP Phones 7906G and 7911G in
Cisco Unified Communications Manager
Task
Gather the following information
1.
about the phone:
Phone Model
–
MAC address
–
Physical location of the phone
–
Name or user ID of phone user
–
Device pool
–
Calling search space and
–
location information (if used)
Number of lines, associated
–
directory numbers (DNs), and
partitions to assign to the
phone

Cisco Unified Communications

–
Manager user to associate with
the phone
Phone usage information that
–
affects phone button template,
softkey template, phone
features, IP Phone services, or
phone applications
Customize phone button templates
2.
(if required).
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
1-28
Chapter 1
Purpose
Provides list of configuration
requirements for setting up
phones.
Identifies preliminary
configuration that you need to
perform before configuring
individual phones, such as phone
button templates or softkey
templates.
Adds Privacy feature to meet
user needs.
An Overview of the Cisco Unified IP Phone
For More Information
Refer to the Cisco Unified
Communications
Manager System Guide,
Cisco Unified IP Phone
chapter.
See the "Telephony
Features Available for the
Cisco Unified IP Phone"
section on page
Refer to the
Cisco Communications
Manager Administration
Guide,
"Phone Button Template
Configuration" chapter.
See the "Modifying Phone
Button Templates" section
on page 5-24.
5-2.
OL11954-01