Disabling And Enabling Web Page Access - Cisco 7911G - IP Phone VoIP Administration Manual

Disabling and Enabling Web Page Access

Disabling and Enabling Web Page Access
Step 1
Step 2
Step 3
Step 4
Step 5
Device Information
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
8-4
For security purposes, you may choose to prevent access to the web pages for a
phone. If you do so, you will prevent access to the web pages that are described
in this chapter and to the phone's User Options web pages.
To disable access to the web pages for a phone, follow these steps from
Cisco Unified Communications Manager Administration:
Procedure
Choose Device > Phone.
Specify the criteria to find the phone and click Find, or click Find to display a list
of all phones.
Click the device name to open the Phone Configuration window for the device.
From the Web Access drop-down list box, choose Disabled.
Click Update.
Some features, such as Cisco Quality Report Tool, do not function
Note
properly without access to the phone web pages. Disabling web access
also affects any serviceability application that relies on web access, such
as CiscoWorks.
To enable web page access when it is disabled, refer to the preceding steps about
disabling access. Follow these same steps, but choose Enabled in Step 4.
The Device Information area on a phone's web page displays device settings and
related information for the phone.
To display the Device Information area, access the web page for the phone as
described in the "Accessing the Web Page for a Phone" section on page
then click the Device Information hyperlink.
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Table 8-1 describes these items.
8-2, and
OL11954-01