Network Configuration Menu - Cisco 7911G - IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-1 Network Configuration Menu Settings (continued)
Category
Port settings

Network Configuration Menu

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Description
Allow you to set the speed and duplex of the
network and access ports.
Related Topics
Displaying a Configuration Menu, page 4-2
•
Unlocking and Locking Options, page 4-4
•
Editing the Values of an Option Setting, page 4-5
•
Network Configuration Menu, page 4-7
•
Device Configuration Menu, page 4-15
•
The Network Configuration menu provides options for viewing and making a
variety of network settings.
applicable, explains how to change them.
For information about how to access the Network Configuration menu, see the
"Displaying a Configuration Menu" section on page
Before you can change an option on this menu, you must unlock options as
described in the "Unlocking and Locking Options" section on page
Yes, or No softkeys for changing network configuration options appear only if
options are unlocked.
For information about the keys you can use to edit options, see the
Values of an Option Setting" section on page
Network Configuration Menu
Option
SW Port Configuration
PC Port Configuration (applies
to 7911G only)
Table 4-2 describes these options and, where
4-5.
Network Configuration Menu
4-2.
4-4. The Edit,
"Editing the
4-7