Cisco 7911G - IP Phone VoIP Administration Manual page 146

Telephony Features Available for the Cisco Unified IP Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Call pickup
Call Recording
Call waiting
Caller ID
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
5-6
Description
Allows users to redirect a call that is ringing
on another phone within their pickup group
to their phone.
You can configure an audio and/or visual
alert for the primary line on the phone. This
alert notifies the users that a call is ringing
in their pickup group.
Allows a supervisor to record an active call.
The user might hear an intermittent tone
(beep tone) during a call when it is being
recorded.
The intercom feature is disabled
Note
when a call is being monitored or
recorded.
Receives a second incoming call on the
same line without disconnecting the first
call.
Displays the telephone number and name of
the caller.
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information, refer to:
•
•
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, "Monitoring and Record-
ing" chapter.
Requires no configuration.
For more information, refer to the:
•
•
•
Cisco Unified
Communications Manager
Administration Guide, "Call
Pickup Group" chapter.
Cisco Unified
Communications Manager
Features and Services Guide,
"Call Pickup Group" chapter.
Cisco Unified Communications
Manager Administration
Guide, Configuring
"Cisco Unified IP Phones"
chapter
Cisco Unified Communications
Manager System Guide,
"Understanding Route Plans"
chapter
Cisco Unified Communications
Manager Features and
Services Guide, "Call Display
Restrictions" chapter
OL11954-01