Cisco 7911G - IP Phone VoIP Administration Manual page 179

Chapter 6 Customizing the Cisco Unified IP Phone
Configuring Wideband Codec
Manager will advertise G.722 to C.isco Unified Communications Manager. If
each endpoint in the attempted call supports G.722 in its capabilities set, Cisco
Unified Communications Manager will choose that codec for the call.
Advertise G.722 Codec—Choose Cisco Unified Communications Manager
•
> Device > Phone. The default value of this product-specific parameter is to
use the value specified in the enterprise parameter. If you want to override this
on a per-phone basis, choose Enabled or Disabled in the Advertise G.722
Codec parameter on the Product Specific Configuration area of the Phone
Configuration window.
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
6-9
OL11954-01