Network Configuration - Cisco 7911G - IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-16 Network Configuration Menu Options
Option Description
Load Server Used to optimize installation time for phone
firmware upgrades and offload the WAN by
storing images locally, negating the need to
traverse the WAN link for each phone's upgrade.
You can set the Load Server to another TFTP
server IP address or name (other than the TFTP
Server 1 or TFTP Server 2) from which the
phone firmware can be retrieved for phone
upgrades. When the Load Server option is set,
the phone contacts the designated server for the
firmware upgrade.
Note
RTP Control Indicates whether the phone supports the Real
Protocol Time Control Protocol. Settings include:
•
•
If this feature is disabled, several call statistic
values display as 0. For additional information,
see the following sections:
•
•
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
The Load Server option allows you to
specify an alternate TFTP server for
phone upgrades only. The phone
continues to use TFTP Server 1 or TFTP
Server 2 to obtain configuration files.
The Load Server option does not provide
management of the process and of the
files, such as file transfer, compression,
or deletion.
Enabled
Disabled—default
"Call Statistics Screen" section on
page 7-16
"Streaming Statistics" section on page 8-15
Device Configuration Menu
To Change
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
4-35