Configuring Startup Network Settings; Configuring Security On The Cisco Unified Ip Phone - Cisco 7911G - IP Phone VoIP Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone

Configuring Startup Network Settings

Configuring Security on the Cisco Unified IP Phone

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
If you are not using DHCP in your network, you must configure these network
settings on the Cisco Unified IP Phone after installing the phone on the network:
IP address
•
IP subnet mask
•
Default gateway IP address
•
Domain name
•
• DNS server IP address
TFTP server IP address
•
Collect this information and see the instructions in
Settings on the Cisco Unified IP Phone."
The security features protect against several threats, including threats to the
identity of the phone and to data. These features establish and maintain
authenticated communication streams between the phone and the
Cisco Unified Communications Manager server, and digitally sign files before
they are delivered.
For more information about the security features, see the
Features for Cisco Unified IP Phones" section on page
Cisco Unified Communications Manager Security Guide.
A Locally Significant Certificate (LSC) installs on phones after you perform the
necessary tasks that are associated with the CAPF. You can use
Cisco Unified Communications Manager Administration to configure an LSC, as
described in Cisco Unified Communications Manager Security Guide.
Alternatively, you can install an LSC from the Security Configuration menu on
the phone. This menu also lets you update or remove an LSC.
Configuring Startup Network Settings
Chapter 4, "Configuring
"Understanding Security
1-12. Also, refer to
3-17