Media Configuration Menu; Ntp Configuration Menu (Sip Phones Only) - Cisco 7911G - IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-11 Media Configuration Menu Options (continued)
Option Description
Enterprise Enables/disables Cisco Unified IP
Advertise G.722 Phones to advertise the G.722 codec to
Codec Cisco Unified Communications
Manager. If enabled (default), and if
each endpoint in the attempted call
supports G.722 in its capabilities set,
Cisco Unified Communications
Manager will choose G.722 for the call.
Note
Device Advertise Allows you to override the Enterprise
G.722 Codec Advertise G.722 Codec on a per-phone
basis.
The default is "Use System Default,"
which means the value configured for
the Enterprise Advertise G.722 Codec
parameter gets used.

NTP Configuration Menu (SIP Phones Only)

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
When a phone is registered
with a Cisco Unified
Communications Manager that
does not support this setting,
the default is "Disabled."
The NTP Configuration menu, which opens when you select NTP Configuration
on the Locale Configuration menu, displays information about the NTP server and
mode configuration used by the phone.
menu. For more information, see
To Change
Use Cisco Unified Communications
Manager Administration > System >
Enterprise Parameters.
Use Cisco Unified Communications
Manager Administration > Device >
Phone.
Table 4-12 describes the options on this
Locale Configuration Menu, page
Device Configuration Menu
4-24.
4-29