Connect The Phone To The Cisco Unified Communications Manager - Cisco 8821 User Manual

Phone Setup
• PIN or passkey for the selected security type
Procedure
Step 1
Access the Settings app.
Step 2
Select Wi-Fi.
Step 3
Select a profile.
Step 4
Select WLAN configuration.
Step 5
Select the SSID field.
Step 6
Enter the SSID for your wireless network.
Step 7
Press More and select Set.
Step 8
Select Security Mode and set the required security type.
Step 9
If security is set to WEP, do the following steps:
a) Select WEP key.
b) Enter the password.
c) Press More and select Set.
Step 10 Click Save.
Step 11 Exit to the home screen.
What to Do Next
Set up the phone to connect to the call control system.

Connect the Phone to the Cisco Unified Communications Manager

Before You Begin
• You need the IP address of the Cisco Unified Communications Manager TFTP server.
• The phone must be configured in the Cisco Unified Communications Manager
• The phone must be connected to the Wi-Fi network.
Connect the Phone to the Cisco Unified Communications Manager
Cisco Wireless IP Phone 8821 and 8821EX User Guide
21