Cisco Unified Ip Phone Deployment; Cisco Unified Ip Phone Setup In Cisco Unified Communications Manager; Manager - Cisco 8961 Administration Manual

Cisco Unified IP Phone
If the initiator phone is configured for encryption, the barge initiator can barge into a nonsecure call from the
encrypted phone. After the barge occurs, Cisco Unified Communications Manager classifies the call as
nonsecure.
If the initiator phone is configured for encryption, the barge initiator can barge into an encrypted call, and the
phone indicates that the call is encrypted.

Cisco Unified IP Phone Deployment

When deploying a new IP telephony system, system administrators and network administrators must complete
several initial configuration tasks to prepare the network for IP telephony service. For information and a
checklist for setting up and configuring a Cisco IP telephony network, see the "System Configuration Overview"
chapter in Cisco Unified Communications Manager System Guide.
After you set up the IP telephony system and configure systemwide features in Cisco Unified Communications
Manager, you can add IP phones to the system.

Cisco Unified IP Phone Setup in Cisco Unified Communications Manager

To add phones to the Cisco Unified Communications Manager database, you can use:
• Autoregistration
• Cisco Unified Communications Manager Administration
• Bulk Administration Tool (BAT)
• BAT and the Tool for Auto-Registered Phones Support (TAPS)
For general information about configuring phones in Cisco Unified Communications Manager, see the following
documentation:
• "Cisco Unified IP Phones" chapter in the Cisco Unified Communications Manager System Guide
• "Cisco Unified IP Phone configurations" chapter in the Cisco Unified Communications Manager
• "Autoregistration configuration" chapter in the Cisco Unified Communications Manager Administration
• Cisco Unified Communications Manager Bulk Administration Guide.
Related Topics
Cisco Unified Communications Manager Phone Addition Methods, on page 50
Set up Cisco Unified IP Phone 8961, 9951, and 9971 in Cisco Unified Communications Manager
The following steps provide an outline of configuration tasks for the Cisco Unified IP Phone 8961, 9951, and
9971 in Cisco Unified Communications Manager Administration. The steps present a suggested order to guide
you through the phone configuration process. Some tasks are optional, depending on your system and user
needs. For detailed procedures and information, see the sources in the steps.
REVIEW DRAFT - CISCO CONFIDENTIAL
Administration Guide.
Guide.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Cisco Unified IP Phone Deployment
(SIP)
35