Cisco 7911G - IP Phone VoIP Administration Manual page 31

Chapter 1 An Overview of the Cisco Unified IP Phone
Table 1-2 Cisco Unified IP Phone Security Topics
Topic
Detailed explanation of security, including set up,
configuration, and troubleshooting information
for Cisco Unified Communications Manager and
Cisco Unified IP Phones
Security features supported on the Cisco Unified
IP Phone
Restrictions regarding security features
Identifying phone calls for which security is
implemented
Transport Layer Security (TLS) connection
802.1X authentication for Cisco Unified IP
Phones
Security and the phone startup process
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
for encryption. For detailed information, refer to the "Configuring Encrypted
Phone Configuration Files" chapter in Cisco Unified Communications Manager
Security Guide.
Table 1-2 shows where you can find additional information about security in this
and other documents.
Understanding Security Features for Cisco Unified IP Phones
Reference
Refer to Cisco Unified Communications Manager
Security Guide.
See the "Overview of Supported Security
Features" section on page
See the "Security Restrictions" section on
page 1-25.
See the "Identifying Encrypted and Authenticated
Phone Calls" section on page
See the "What Networking Protocols Are
•
Used?" section on page
See the "Understanding Phone Configuration
•
Files" section on page
See these sections:
"Supporting 802.1X Authentication on Cisco
•
Unified IP Phones" section on page 1-23
"Security Configuration Menu" section on
•
page 4-38
"802.1X Authentication and Status" section
•
on page 4-43
"Troubleshooting Cisco Unified IP Phone
•
Security" section on page 9-12
See the "Understanding the Phone Startup
Process" section on page
1-15.
1-19.
1-5.
2-7.
2-8.
1-13