Cisco 7911G - IP Phone VoIP Administration Manual page 194

Status Menu
Table 7-4
Item
One of the following
values:
Initialized
TCP-timeout
CM-closed-TCP
TCP-Bad-ACK
CM-reset-TCP
CM-aborted-TCP
CM-NAKed
KeepaliveTO
Failback
Phone-Keypad
Phone-Re-IP
Reset-Reset
Reset-Restart
Phone-Reg-Rej
Load Rejected HC
CM-ICMP-Unreach
Phone-Abort
Elapsed Time
Port 1
Port 2 (applies to 7911G
only)
DHCP BOUND
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
7-14
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Network Statistics Screen (continued)
Description
Cause of the last reset of the phone
Amount of time that has elapsed since the phone
connected to Cisco Unified Communications
Manager
Link state and connection of the Network port
Link state and connection of the PC port (for
example,
PC port is in a link up state and has auto-negotiated
a full-duplex, 100-Mbps connection)
Indicates whether DHCP parameters are associated
with the phone.
Auto 100 Mb Full-Duplex
means that the
OL11954-01