Cisco 7911G - IP Phone VoIP Administration Manual page 210

Network Configuration
Table 8-2
Item
PC Port Configuration
(applies to 7911G
only)
TFTP Server 2
User Locale
Network Locale
User Locale Version
Network Locale
Version
PC Port Disabled
(applies to 7911G
only)
Speaker Enabled
Group Listen
GARP Enabled
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
8-10
Chapter 8
Network Configuration Area Items (continued)
Description
Speed and duplex of the switch port, where:
A—Auto Negotiate
•
10H—10-BaseT/half duplex
•
10F—10-BaseT/full duplex
•
100H—100-BaseT/half duplex
•
100F—100-BaseT/full duplex
•
No Link—No connection to the PC port
•
Backup TFTP server that the phone uses if the primary
TFTP server is unavailable.
User locale associated with the phone user. Identifies a
set of detailed information to support users, including
language, font, date and time formatting, and
alphanumeric keyboard text information.
Network locale associated with the phone user.
Identifies a set of detailed information to support the
phone in a specific location, including definitions of
the tones and cadences used by the phone.
Version of the user locale loaded on the phone.
Version of the network locale loaded on the phone.
Indicates whether the PC port on the phone is enabled
or disabled.
Indicates whether the speakerphone is enabled on the
phone.
Enables both the handset and speaker to be active at the
same time, so that one user can talk into the handset
while other users listen over the speaker.
Indicates whether the phone learns MAC addresses
from Gratuitous ARP responses.
Monitoring the Cisco Unified IP Phone Remotely
OL11954-01