Cisco 7911G - IP Phone VoIP Administration Manual page 206

Network Configuration
Network Configuration
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
8-6
Table 8-1 Device Information Area Items (continued)
Item
Time Zone
Date
1. The Version Identifier field might display blank if using an older model Cisco Unified IP Phone
because the hardware does not provide this information.
The Network Configuration area on a phone's web page displays network
configuration information and information about other phone settings.
describes these items.
You can view and set many of these items from the Network Configuration Menu
and the Device Configuration Menu on the Cisco Unified IP Phone. For more
information, see Chapter 5, "Configuring Features, Templates, Services, and
Users."
To display the Network Configuration area, access the web page for the phone as
described in the "Accessing the Web Page for a Phone" section on page
then click the Network Configuration hyperlink.
Table 8-2 Network Configuration Area Items
Item
DHCP Server
BOOTP Server
MAC Address
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Description
Timezone obtained from the Date/Time Group in
Cisco Unified Communications Manager to which the
phone belongs
Date obtained from the Date/Time Group in
Cisco Unified Communications Manager to which the
phone belongs
Description
IP address of the Dynamic Host Configuration
Protocol (DHCP) server from which the phone obtains
its IP address.
Indicates whether the phone obtains its configuration
from a Bootstrap Protocol (BootP) server.
Media Access Control (MAC) address of the phone.
Table 8-2
8-2, and
OL11954-01