Cisco 7911G - IP Phone VoIP Administration Manual page 132

Security Configuration Menu
Table 4-16 Network Configuration Menu Options (continued)
Option Description
Log Server Indicates the IP address and port of the remote
logging machine to which the phone sends log
messages. These log messages help in
debugging the peer to peer image distribution
feature.
Note
CDP: PC Port Indicates whether CDP is enabled on the PC port
(default is enabled).
(applies to
7911G only) Enable CDP on the PC port when Cisco VT
Advantage/Unified Video Advantage (CVTA) is
connected to the PC port. CVTA does not work
without CDP interaction with the phone.
Note
Note
Security Configuration Menu
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
4-38
The remote logging setting does not
affect the sharing log messages sent to
the phone log.
When CDP is disabled in Cisco Unified
Communications Manager, a warning is
displayed, indicating that disabling CDP
on the PC port prevents CVTA from
working.
The current PC and switch port CDP
values are shown on the Settings menu.
The Security Configuration menu that you access directly from the Settings menu
provides information about various security setting. It also provides access to the
CTL File screen and the Trust List menu, if a CTL file is installed on the phone.
For instructions about how to access the Device Configuration menu and its
sub-menus, see the "Displaying a Configuration Menu" section on page
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Use Cisco Unified
Communications Manager
Administration > Device >
Phone > Phone Configuration.
Use Cisco Unified
Communications Manager
Administration > Device >
Phone.
4-2.
OL11954-01