Cisco Unified Ip Phone Resets Unexpectedly; Verifying Physical Connection; Identifying Intermittent Network Outages - Cisco 7911G - IP Phone VoIP Administration Manual

Unified ip phone cisco unified communications manager 6.0
Hide thumbs Also See for 7911G - IP Phone VoIP:
Table of Contents

Advertisement

Chapter 9
Troubleshooting and Maintenance

Cisco Unified IP Phone Resets Unexpectedly

Verifying Physical Connection

Identifying Intermittent Network Outages

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
If users report that their phones are resetting during calls or while idle on their
desk, you should investigate the cause. If the network connection and
Cisco Unified Communications Manager connection are stable, a
Cisco Unified IP Phone should not reset on its own.
Typically, a phone resets if it has problems connecting to the Ethernet network or
to Cisco Unified Communications Manager. These sections can help you identify
the cause of a phone resetting in your network:
Verifying Physical Connection, page 9-9
Identifying Intermittent Network Outages, page 9-9
Verifying DHCP Settings, page 9-10
Checking Static IP Address Settings, page 9-10
Verifying Voice VLAN Configuration, page 9-10
Verifying that the Phones Have Not Been Intentionally Reset, page 9-11
Eliminating DNS or Other Connectivity Errors, page 9-11
Verify that the Ethernet connection to which the Cisco Unified IP Phone is
connected is up. For example, check if the particular port or switch to which the
phone is connected is down.
Intermittent network outages affect data and voice traffic differently. Your
network might have been experiencing intermittent outages without detection. If
so, data traffic can resend lost packets and verify that packets are received and
transmitted. However, voice traffic cannot recapture lost packets. Rather than
retransmitting a lost network connection, the phone resets and attempts to
reconnect its network connection.
If you are experiencing problems with the voice network, you should investigate
whether an existing problem is simply being exposed.
Cisco Unified IP Phone Resets Unexpectedly
9-9

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 7911G - IP Phone VoIP and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Cp-7911g7906g

Table of Contents

Save PDF