Cisco Unified Communications Manager Accessibility Features - Cisco 8811 Features

Cisco Unified Communications Manager Accessibility Features

Cisco Unified Communications Manager Accessibility Features
The following table provides information on the Cisco Unified Communications Manager (Cisco Unified
CM) accessibility features. For more information, see the user guide applicable to your phone.
Accessibility Feature
Programmable Line
Key (PLK)
Audible Message
Waiting Indicator
(AMWI)
Do Not Disturb (Alert
and Reject)
Accessibility Features for the Cisco IP Phone 8800 Series
12
Description
You can use the line buttons to initiate, answer,
or switch to a call on a particular line. A
limited number of features, such as speed dial,
extension mobility, privacy, Busy Lamp Field
(BLF) speed dial, Do Not Disturb (DND), and
Service URLs, get assigned to these buttons.
The PLK feature expands the features that can
be assigned to the line buttons to include those
that softkeys normally control; for example
New Call, Call Back, End Call, and Forward
All. When these features are configured on the
line buttons, they are always visible, so you
can have a "hard" New Call key.
You can access features easily that may be
assigned to softkeys normally, which can be
too small and difficult to use.
Cisco Unified IP Phones can send a
line-specific stutter dial tone when a voice
message is waiting on the phone. You hear it
only when using the line with the waiting
messages. When you go off hook (on the line
for which a voice message has been left), the
stutter dial tone is heard.
You can change the audible voice-message
indicator setting by logging in to your phone
support pages, and changing the audible
message-indicator setting to On or Off.
Your administrator configures the phone to
turn on all audible and visual notifications, turn
on ringer only, or to choose the type of alert a
phone should play for incoming calls.
Accessibility Features for the Cisco IP Phone 8800 Series
Configuration Requirements
Standard on all Cisco IP Phones;
configuration is required.
Your administrator assigns PLKs
to your phone.
Standard on all Cisco IP Phones.
Configuration is required:
• administrator
• phone support pages
Standard on all Cisco IP Phones;
configuration is required.