Cisco 7911G - IP Phone VoIP Administration Manual page 154

Telephony Features Available for the Cisco Unified IP Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Join
(SCCP phones
only)
Hunt Group
Log out of hunt
groups
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
5-14
Description
Allows a user to initiate an ad hoc
conference by using the Join softkey.
Join does not create a consultation call and
does not put the active call on hold. Join can
include more than two calls, which results
in a call with more than three parties.
Provides load sharing for calls to a main
directory number. A hunt group contains a
series of directory numbers that can answer
the incoming calls. When the first directory
number in the hunt group is busy, the
system hunts in a predetermined sequence
for the next available directory number in
the group and directs the call to that phone.
Allows users to log out of a hunt group and
temporarily block calls from ringing their
phone when they are not available to take
calls. Logging out of hunt groups does not
prevent non-hunt group calls from ringing
their phone.
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
For more information, refer to the
Cisco Unified Communications
Manager System Guide,
"Cisco Unified IP Phones" chapter
For more information, refer to:
•
•
For more information
•
•
Cisco Unified
Communications Manager
Administration Guide, "Hunt
Group Configuration" chapter
Cisco Unified
Communications Manager
System Guide,
"Understanding Route Plans"
chapter
See the "Configuring Softkey
Templates" section on
page 5-25
Cisco Unified
Communications Manager
System Guide,
"Understanding Route Plans"
chapter.
OL11954-01