Administration; Adding Phones With Bat - Cisco 7911G - IP Phone VoIP Administration Manual

Adding Phones to the Cisco Unified Communications Manager Database
Adding Phones with Cisco Unified Communications Manager

Administration

Adding Phones with BAT

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
2-16
Chapter 2
You can add phones individually to the Cisco Unified Communications Manager
database using Cisco Unified Communications Manager Administration. To do
so, you first need to obtain the MAC address for each phone.
For information about determining a MAC address, see the
MAC Address of a Cisco Unified IP Phone" section on page
After you have collected MAC addresses, in Cisco Unified Communications
Manager Administration, choose Device > Phone and click Add New to begin.
For complete instructions and conceptual information about Cisco Unified
Communications Manager, refer to Cisco Unified Communications Manager
Administration Guide and to Cisco Unified Communications Manager System
Guide.
Related Topics
Adding Phones with Auto-Registration, page 2-13
•
• Adding Phones with Auto-Registration and TAPS, page 2-14
Adding Phones with BAT, page 2-16
•
The Cisco Bulk Administration Tool (BAT) is a plug-in application for
Cisco Unified Communications Manager that enables you to perform batch
operations, including registration, on multiple phones.
To add phones using BAT only (not in conjunction with TAPS), you first need to
obtain the appropriate MAC address for each phone.
For information about determining a MAC address, see the
MAC Address of a Cisco Unified IP Phone" section on page
Related Topics
Adding Phones with Auto-Registration, page 2-13
•
Adding Phones with Auto-Registration and TAPS, page 2-14
•
Preparing to Install the Cisco Unified IP Phone on Your Network
"Determining the
2-19.
"Determining the
2-19.
OL11954-01