Cisco 7911G - IP Phone VoIP Administration Manual page 130

Device Configuration Menu
Table 4-16 Network Configuration Menu Options (continued)
Option Description
CDP: SW Port Indicates whether CDP is enabled on the switch
port (default is enabled).
•
•
Note
The current PC and switch port CDP values are
shown on the Settings menu.
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
4-36
Enable CDP on the switch port for VLAN
assignment for the phone, power
negotiation, QoS management, and 802.1x
security.
Enable CDP on the switch port when the
phone is connected to a Cisco switch.
When CDP is disabled in Cisco Unified
Communications Manager, a warning is
presented, indicating that CDP should be
disabled on the switch port only if the
phone is connected to a non-Cisco
switch.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Use Cisco Unified
Communications Manager
Administration > Device >
Phone.
OL11954-01