X Authentication And Status - Cisco 7911G - IP Phone VoIP Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-19 Trust List Information
Option Description
CAPF Server IP address of the CAPF used by the
phone. Also displays a certificate
this server.
CallManager / IP address of
TFPT Server Cisco Unified Communications
Manager and TFTP servers used by the
phone. Also displays a certificate
icon if a certificate is installed for this
server.
SRST Router IP address of the trusted SRST router
that is available to the phone, if such a
device has been configured in
Cisco Unified Communications
Manager Administration. Also displays
a certificate
installed for this server.

802.1X Authentication and Status

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
icon if a certificate is installed for
icon if a certificate is
Use the options that are described in the following tables to enable 802.1X
authentication and monitor its progress:
Table 4-20 on page
•
Table 4-21 on page
•
To Change
For more information about these
settings, refer to the "Configuring the
Cisco CTL Client" section in Cisco
Unified Communications Manager
Security Guide.
For more information about these
settings, refer to the "Configuring the
Cisco CTL Client" section in Cisco
Unified Communications Manager
Security Guide.
For more information about these
settings, refer to the "Configuring the
Cisco CTL Client" section in Cisco
Unified Communications Manager
Security Guide.
4-44—802.1X Authentication Settings
4-45—802.1X Authentication Real-Time Status
Security Configuration Menu
4-43