Draytek Vigor2136 Series User Manual page 83

II-1-5-5 WPS
WPS (Wi-Fi Protected Setup) provides an easy way to connect wireless to wireless access points
and routers with WPA or WPA2 encryption.
WPS works with wireless stations with WPA or WPA2 support. It does not work with WEP.
It is the simplest way to build connection between wireless network clients and vigor router. Users
do not need to select any encryption mode and type any long encryption passphrase to setup a
wireless client every time. He/she only needs to press a button on wireless client, and WPS will
connect for client and router automatically.
There are two methods to do network connection through WPS between AP and Stations: pressing
the Start PBC button or using PIN Code.
Using the PBC button
On the Vigor router, press and hold the WPS button on the front panel for 2 seconds, or click the
Start PBC button on the Configuration>>Wireless LAN>>WPS page in the Web User Interface. On
the wireless station (for example, a laptop computer), press the WPS/Start PBC button on the
network card.
73