Draytek Vigor2136 Series User Manual page 139

Specify Source Port
Destination Port Start
/ Destination Port End
Destination Invert
Cancel
Apply
After finishing this web page configuration, please click Apply to save the settings.
II-1-13-7 Keyword Object
50 Keyword Object Profiles can be created for use as blacklists or white lists.
To add a keyword object profile, click the +Add link to get the following page.
UDP – User Datagram Protocol
TCP/UDP – Transmission Control Protocol and User Datagram
Protocol
Other – Other protocols not listed above. Enter protocol number in
the textbox.
When protocol selected includes TCP or UDP, the source and
destination ports can be specified.
Switch the toggle to enable/disable the source port settings.
Source Port Start / Source Port End – Enter two values to define the
port range of source port.
Source Invert - If enabled, all port values except the ones entered
above (Source Port Start/End) will be used.
When protocol selected includes TCP or UDP, the source and
destination ports can be specified.
If enabled, all port values except the ones entered above (Destination
Port Start/End) will be used.
Discard current settings and return to the previous page.
Save the current settings and exit the page.
129