Draytek Vigor2136 Series User Manual page 222

Available settings are explained as follows:
Item
Advanced
Mode:ON/OFF
Profile Name
Enabled
Direction
VPN Type
IPsec Dial-In Protocol
IPsec Dial-Out
Protocol
Dial-In Allowed
Description
Click to show or hide the advanced settings for the site-to-site VPN.
Enter the name of the profile.
Switch the toggle to enable/disable the settings.
General
Specify the allowed call direction of this VPN profile.
Both – Profile is to be used to initiate (dial out) or accept (dial in)
connections.
Dial-Out – Profile is to be used to initiate outgoing connections.
Dial-In – Profile is to be used to accept incoming connections.
Select a VPN type for building the VPN connection. Options related to
the VPN type will be changed according to the Direction used.
IPsec (with the direction on Both, Dial-In) -
IPsec Dial-In Protocol

Dial-in Allowed Schedule

IPsec (with the direction on Both, Dial-Out)-
IPsec Dial-Out Protocol

Remote Server

Dial-Out Mode

OpenVPN (with the direction on Both, Dial-In) –
Dial-in Allowed Schedule

OpenVPN (with the direction on Both, Dial-Out) –
Remote Server

Server Port

Dial-Out Mode

WireGuard (with the direction on Dial-In) - The WireGuard VPN type
is available when Dial-In or Dial-Out is selected as the Direction.
Dial-in Allowed Schedule

WireGuard (with the direction on Dial-Out) –
Remote Server

Server Port

Dial-in Allowed Schedule

Select a protocol to trigger an IPsec VPN connection through the
Internet.
IKEv1/v2

XAuth.

Select a protocol to trigger an IPsec VPN connection through the
Internet.
IKEv1

IKEv2

IKEv2 EAP

XAuth

Connect and disconnect according to schedule profiles.
212