Draytek Vigor2136 Series User Manual page 301

IV-2 Utility
This section contains utilities (e.g., ping tool, traceroute, DNS and etc.) that can assist you in
analyzing issues and failures during the setup and operation of the router.
IV-2-1 Network Tools
IV-2-1-1 Ping Tool
The user can perform the ping job for specified IP (host) to diagnose if the data transmission via the
Vigor system is well or not.
Available settings are explained as follows:
Item
IP Version
Ping from
Ping to Host/IP
Address
Packet Size (byte)
Ping Count
Ping Interval (sec.)
Clear
Run
Description
Select the IP version for entering correct IP address.
Select an interface (LAN or WAN) from drop down list to through
which you want to perform the ping operation, or choose Auto to be
let the router select the WAN interface.
Enter the IP address of the Host/IP that you want to ping.
Determine the packet size for the ping job.
Determine the quantity of the packet being pinged.
Set a time interval (unit:second) for the system to ping the IP address
specified above.
Remove the settings and return to the factory settings.
Perform the ping job.
291