Draytek Vigor2136 Series User Manual page 269

Trap Version
Trap Community
Trap Port
Notification Host IP
Type
Notification Host(IPv4)
Notification Host(IPv6)
Trap Events
Apply
III-1-2 Management
III-1-2-1 Service Control
This page allows you to manage the general settings, management services, and TLS/SSL Encryption
setup. After a user has been authenticated by means of a username and password, he or she can be
granted Internet access, and optional firewall rules and WAN access policies can be applied.
Available settings are explained as follows:
Item
Select the trap version.
V1

V2c

V3

Enter the Trap Community string. The default setting is public. Devices
that send unsolicited messages to the SNMP console must pass the
correct Trap Community string.
The maximum length of the text is 23 characters.
Enter the port number used for the Trap server.
Select the type of the notification host.
Both

IPv4

IPv6

+Add - Enter the IPv4 address of hosts that are allowed to be sent
SNMP traps.
+Add - Enter the IPv6 address of hosts that are allowed to be sent
SNMP traps.
Select the event(s) to apply the settings configured in this page.
Save the current settings and exit the page.
Description
259