Draytek Vigor2136 Series User Manual page 190

To add a new OpenVPN profile, click OpenVPN Config Generator.
On this page, you can create configuration required for a remote OpenVPN client to connect to the
router and then download it directly or send it to the user via email.
Available settings are explained as follows:
Item
Specify Server URL by
Set VPN as Default
Gateway
Transport Protocol
Auto Dial Out
Description
The OpenVPN client will use the IP address or domain name to
connect to the router.
WAN IP – The OpenVPN configuration file will use the numeric IP
address as the server address.
WAN IP – Select the WAN interface.

DDNS Profile – The OpenVPN configuration file will use the domain
name from the DDNS Profile.
DDNS Profile – Select a DDNS profile.

Custom URL – The OpenVPN configuration file will use the
user-defined server IP or domain name.
Custom URL – Specify a user-defined URL.

Switch the toggle to enable/disable the function.
Enable - The Vigor router will be treated as a "default" gateway for
OpenVPN clients. The OpenVPN client will redirect all the traffic to the
Vigor router via the OpenVPN tunnel.
Disable - Disable the function.
TCP/UDP - Select UDP or TCP for the protocol to be used by the
OpenVPN client to connect to the router.
Switch the toggle to enable/disable the function.
Enable - The remote client can auto-dial to this Vigor router to build
an OpenVPN tunnel.
180