Draytek Vigor2136 Series User Manual page 268

Manager Host
Get Community
Set Community
Query Port
SNMPv3 Agent
Enabled
SNMPv2c Agent
Enabled
SNMPv1 Agent
Enabled
Enabled
Manager
Any - Any IP can be set as the manager host.
Specific Host - Specify a host (IPv4 or IPv6) or hosts (both IPv4 and
IPv6).
IP Type – Select Both, IPv4 or IPv6.

Specific Manager Host (IPv4/IPv6) is available when IPv4/IPv6

is selected as the IP Type. Click +Add to have a new entry.
Enter the IPv4 address with subnet mask / IPv6 address with
specified prefix length of hosts that are allowed to issue SNMP
commands. If these fields are left blank, any IPv4/IPv6 LAN host
is allowed to issue SNMP commands.
Query
Enter the Get Community string. The default setting is public. Devices
that send requests to retrieve information using get commands must
pass the correct Get Community string.
Enter the Set Community string. The default setting is private. Devices
that send requests to change settings using set commands must pass
the correct Set Community string.
Displays the port number used by the query server.
Agent
Switch the toggle to enable/disable the SNMPv3 function.
If enabled, specify corresponding settings. Click +Add to have a new
entry.
Username(USM) - USM means user-based security mode.
Enter the username to be used for authentication.
Authentication - Select one of the hashing methods to be used with
the authentication algorithm.
Authentication Password - Enter a password for authentication.
Privacy - Select an encryption method as the privacy algorithm.
Privacy Password - Enter a password for privacy.
Switch the toggle to enable/disable the SNMPv2 function.
Switch the toggle to enable/disable the SNMPv1 function.
Trap
Switch the toggle to enable/disable the Trap function.
258