Draytek Vigor2136 Series User Manual page 176

Enable Syslog
Cancel
Apply
After finishing this web page configuration, please click Apply to save the settings.
II-2-1-3 Default Filters
Traffic is filtered by firewall functions in the following order:
1. Data Filter Sets and Rules
2. Block connections initiated from WAN
3. Default Rule
This page allows you to choose filtering profiles including QoS, Load-Balance policy, WCF, APP
Enforcement, URL Content Filter, for data transmission via Vigor router.
The default rule applies to all traffic that is not constrained by other filters or rules.
Available settings are explained as follows:
Item
IP Filters Default
Action
Enable Content Filters
Default Rule
Content Filters Default
Action
keyword profile(s). If the session meets the keyword filter profile, the
system will perform the action reversely.
Switch the toggle to enable the recording the filter log onto SysLog.
Discard current settings and return to the previous page.
Save the current settings.
Description
Outbound Traffic (LAN to WAN)
Define the default action for the outgoing packets that do not match
any IP filter rule.
Pass –The packets that do not match any IP filter rule will be passed
and next wait for the content filter.
Block – The packets that do not match any IP filter rule will be blocked
by Vigor system.
Switch the toggle to enable or disable the function.
Define the default action for the outgoing traffic that does not match
any content filter rule.
Pass –The outgoing traffic that does not match any Content filter rule
166