Draytek Vigor2136 Series User Manual page 103

II-1-8-3 IPv4 Networks
This page allows you to configure up to eight neighboring networks for exchanging the routing
information with the local router (Vigor2136). The IP address defined on this page will be used to
declare which network will participate in the RIP protocol.
To add a new IPv4 networks profile (up to 8), click the +Add link to get the following page.
Available settings are explained as follows:
Item
IPv4 Address
Description
Enter the IPv4 address of a neighboring network (following CIDR
format).
Vigor router (e.g., 2136 series) will exchange routing information (RIP
93