Draytek Vigor2136 Series User Manual page 254

Item
Profile Name
Advanced
Mode:ON/OFF
PoE Port Enable
Enable Port by
Schedule
Options under the Advanced Mode
Port Isolation
LACP Priority
LACP Timeout
EEE
Cancel
Apply
After finishing this web page configuration, please click Apply to save the settings.
Description
Enter a name for the Switch. The purpose of name is used for
identification.
It is useful when there are many VigorSwitch (same modes) devices
connecting to Vigor router.
Click to show or hide the advanced settings.
Switch the toggle to enable/disable the port profile.
Set the valid time for the "port profile" when it is applied to specific GE
port.
Always On – The port profile will be valid all the time if it is enabled.
Scheduled On – The port profile will be valid based on the time
schedule specified here.
It allows the network administrator to configure protected port setting
to prevent the selected ports from communication with each other.
Port isolation is only allowed to communicate with unprotected port.
For example, GE1 and GE3 are selected in Port List and Enable is
clicked as port isolation, then users behind GE1 and GE3 are
separated and can not communicate with each other.
Switch the toggle to enable / disable this function.
Enter a port priority number (1 to 65535) for the port.
The timeout option decides how local switch of LAG connection
determines connection to be lost. Switch would also notify the remote
switch about this setting value, so that remote switch can send LACP
PDU in correct timing.
Short - LACP PDU will be sent per second. If port member is not seen
over 3 seconds, it will cause port member timeout.
Long - LACP PDU will be sent every 30 seconds. If port member is not
seen over 90 seconds, it will cause port member timeout.
Switch the toggle to enable or disable port EEE (Energy Efficient
Ethernet) function for the selected port.
Discard current settings and return to the previous page.
Save the current settings and exit the page.
244