Draytek Vigor2136 Series User Manual page 145

II-1-14-4 Temperature Sensor Settings
A USB Thermometer is now available. It complements your installed DrayTek router installations
which will help you monitor the server or data communications room environment and notify you if
the server room or data communications room is overheating.
During summer in particular, it is important to ensure that your server or data communications
equipment are not overheating due to cooling system failures.
The inclusion of a USB thermometer in compatible Vigor routers will continuously monitor the
temperature of its environment. When a pre-determined threshold is reached you will be alerted by
either an email or SMS so you can undertake appropriate action.
For a list of supported USB thermometers, visit our website at
https://www.draytek.com/en/products/usb-thermometer/ or contact your local DrayTek partner.
Available settings are explained as follows:
Item
Temperature Sensor
Settings
Alarm Settings
Cancel
Description
Display information related to manufacturer, product, current
temperature, average temperature, maximum temperature, and
minimum temperature.
Temperature Calibration Unit - Select the temperature scale to be
used.
Temperature Calibration – Enter the difference between the actual
temperature and the temperature as reported by the thermometer.
Enable Syslog Alarm – Select to enable recording of the temperature
in Syslog.
SMS Alert – Switch the toggle to enable/disable the SMS alert.
Send Alert SMS to – Select the SMS sender profile (created on

Configuration>>Notification Services>>SMS Provider).
Email Alert –Switch the toggle to enable/disable the email alert.
Send Alert Email to –Select the email sender profile (created on

Configuration>>Notification Services>>SMTP Server).
Lower temperature/ Upper temperature – Enter the upper and
lower temperature limits. If the temperature falls outside of this
range, an alert will be sent.
Discard current settings and return to the previous page.
135