Draytek Vigor2136 Series User Manual page 245

EasyMesh is not suggested to join existing VigorMesh Environment.

The maximum of devices number is (ssid_num * device_num <= 56) -> device_num is the max

device number
How to set up a VigorMesh group?
The following steps will guide you how to setup a VigorMesh Group.
Please access the web of the device which you want to use it as the Root.
1. (Optional) Open Virtual Controller>>Wireless>>Role Setup.
Set Group Admin Password. This value will be the Administrator Password of the Nodes
after they join the Mesh Group and complete configuration sync.
2. Open Virtual Controller>>Wireless>>Device>>AP Adoption. Click the Scan button.
Wait until the searching result appears.
3.
Choose the device(s) you want to add to the Group and set the names for
identification.
Click the Apply button and wait for it to finish the procedure.
235