Draytek Vigor2136 Series User Manual page 188

Account Info
General
Allowed VPN Protocols
In the filed of Validation Code, enter the one-time password and click
Verify.
Now, the configuration is finished. You will be asked to enter the 2FA
code on the after passing the username and password authentication.
SMS/Email – The password will be transferred via the SMS and/or
Mail profiles selected from User Information above.
mOTP - Mobile one-Time Password (mOTP) allows the use of mOTP
passwords. Enter the PIN Code and Secret settings for getting
one-time passwords.
Displays general information (created time, last login at and last login
IP) for the user account.
Teleworker VPN
(available if IAM User is selected as the Usage)
Enable Teleworker VPN – Switch the toggle to enable/disable
Teleworker VPN configuration.
Idle Timeout – If the user is idle over the limitation of the timer, the
network connection will be stopped for this user. By default, the Idle
Timeout is set to 300 seconds.
VPN Schedule – Select Always On (Telework VPN is running all the
time). Or choose Scheduled On to make the VPN connection based
on the schedule.
Before configuring VPN Schedule, add the required time intervals in
Configuration>>Objects >>Schedule.
Download SmartVPN Client - Click to download the utility of
DrayTeck SmartVPN client for building VPN connection.
Select IPsec, WireGuard or OpenVPN as the protocol for the
teleworker VPN connection.
Enable IPsec – Switch the toggle to enable the IPsec protocol.
If enabled, select IKEv1/v2, EAP and/or XAuth as the IPsec protocol.
Enable WireGuard –Switch the toggle to enable WireGuard protocol.
Public Key – Enter the string offered by the remote WireGuard

VPN client.
Pre-Shared Key – Displays the private key generated by clicking

Generate PSK.
Generate PSK – Click the Generate button to generate a

pre-shared key.
Persistent Keepalive – Default is 60 seconds. If the peer is behind

a NAT or a firewall, use the default setting.
178