Draytek Vigor2136 Series User Manual page 159

802.1X Method
Certificate
User
User Group
Cancel
Apply
After finishing this web page configuration, please click Apply to save the settings.
II-1-17-3 External TACACS+
It means Terminal Access Controller Access-Control System Plus. It works like RADIUS does. Click the
External TACACS+ to open the following page:
Available settings are explained as follows:
Item
Enabled
Authentication Port
to validate users.
Support 802.1X Method – The built in RADIUS server offered by Vigor
router can act as the AAA server. Select to enable 802.1X support.
Select the certificate (created by Configuration>>Certificates>>Local
Certificates) for applying to Internal RADIUS.
User Profile
During the process of security authentication, user account and user
password will be required for identity authentication. Before
configuring such page, create at least one user profile in IAM>>Users
& Groups first.
All Users – Click to make all user profiles for security authentication.
Select Users – Click to select the user profile(s) for security
authentication.
All Groups – Click to make all user groups for security authentication.
Select Groups – Click to select the user groups for security
authentication.
Discard current settings and return to the previous page.
Save the current settings and exit the page.
Description
Switch the toggle to enable/disable this profile.
The UDP port number that the RADIUS server is using. The default
value is 1812, based on RFC 2138.
Primary Server/Secondary Server
149