Draytek Vigor2136 Series User Manual page 210

Whitelist Setting
In this page you can configure the whitelist settings. Users are allowed to send and receive traffic
that satisfies whitelist settings.
Available settings are explained as follows:
Item
+Add
+Add
Destination Groups
+Add
Cancel
Apply
Description
Destination Domain/IP
Enabled – Switch the toggle to enable/disable the setting.
Destination Domain/IP Whitelist – Please enter IP address or
domain name without the 'http://' or 'https://' prefix.
Option (Delete) – Remove current entry.
Destination Port
Enabled – Switch the toggle to enable/disable the setting.
Destination Port Whitelist – Select TCP, UDP, or TCP/UDP. The, enter
the port number.
Option (Delete) – Remove current entry.
Destination Groups
Select one IP group or multiple IP groups (created on Configuration >>
Objects >> IP Group) as the destination.
The selected groups are allowed to be accessed.
Source IP
The selected IPs are allowed through the router.
Enabled – Switch the toggle to enable/disable the setting.
Source IP Whitelist – Enter the IP address.
Option (Delete) – Remove current entry.
Discard current settings and return to the previous page.
Save the current settings and exit the page.
200