Draytek Vigor2136 Series User Manual page 147

II-1-15 Wake on LAN
Using the Wake on LAN (WoL) feature, LAN clients that support WoL can be powered on or resume
from sleep over the network, without the need for physical access to the device.
In order for LAN clients to be able to wake from sleep or off states, the network interface card must
be configured to monitor Wake-on-LAN messages. Consult the documentation of the LAN client for
details on setting up its network interface for Wake on LAN.
If you wish to be able to select the IP address of the Wake-on-LAN client, its MAC address must first
be bound to a static IP address using the Bind IP to MAC function.
Available settings are explained as follows:
Item
Wake by
MAC Address
Description
Wake on LAN from Router
The type of address of the LAN client to be woken up.
MAC Address

Bind IP to MAC List

The MAC address specified here will be the device to be waken by
Vigor router.
If MAC Address is selected in Wake by, the content listed on ARP
Table will be shown for you to choose.
If Bind IP to MAC List is selected in Wake by, the profile content listed
137