Draytek Vigor2136 Series User Manual page 37

+Add
To add a new virtual WAN, click the +Add link to get the following page.
Available settings are explained as follows:
Item
Advanced Mode:
ON/OFF
Name
Enabled
WAN Type
WAN Interface
Port Based Bridge
Multicast Stream
VLAN Trans
Click to bring up the configuration page of the virtual WAN profile
(max. 5).
Description
Click to show or hide the advanced settings for virtual WAN.
Enter a name as the profile name.
Switch the toggle to enable or disable the function.
General
Displays the type (e.g., Ethernet) of the physical interface.
Select one of the available WAN interfaces (enabled on WAN>>WAN
Connections).
Port-Based Bridge
Switch the toggle to enable or disable the function.
Binding Interface - Select an interface for binding.
Switch the toggle to enable or disable the function.
In some areas, the multicast VLAN tag value might be different from
the IGMP VLAN tag. That might cause data transfer issues for IPTV
packets flooding to other VLAN ports while watching the IPTV
program.
Configure the IGMP VLAN tag and the multicast VLAN tag with the
same value if required.
Downstream Multicast VLAN Tag – Enter the value for tagging the
27